{"id":3565,"date":"2026-10-09T10:02:31","date_gmt":"2026-10-09T02:02:31","guid":{"rendered":"http:\/\/www.monsterclimbs.com\/blog\/?p=3565"},"modified":"2026-10-09T10:02:31","modified_gmt":"2026-10-09T02:02:31","slug":"what-are-the-environmental-requirements-for-vcsel-to-can-storage-4fb6-766e78","status":"publish","type":"post","link":"http:\/\/www.monsterclimbs.com\/blog\/2026\/10\/09\/what-are-the-environmental-requirements-for-vcsel-to-can-storage-4fb6-766e78\/","title":{"rendered":"What are the environmental requirements for VCSEL TO – can storage?"},"content":{"rendered":"

Hey there, fellow photonics nerds and component buyers! Let\u2019s cut to the chase\u2014if you\u2019re working with VCSEL TO-cans (that\u2019s Vertical-Cavity Surface-Emitting Laser transistor outline cans, for anyone new to the party), you already know these tiny powerhouses don\u2019t play around when it comes to storage mess-ups. As a VCSEL TO-can supplier who\u2019s seen way too many good parts get scrapped because of wrong storage, I\u2019m here to spill the real tea on what actually matters, not just the dusty ISO scribbles. No stuffy jargon overload, promise. VCSEL TO-can<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get one thing straight: VCSELs are finicky little dudes. Their performance rides on super precise internal structures\u2014like the epitaxial layers (think tiny, super-tunable sandwich layers) and the tiny metal contacts, all hermetically sealed inside that TO-can housing. Mess with the storage conditions, even a little, and suddenly your VCSEL\u2019s output power drops, its wavelength drifts, or it starts flickering like a bad LED. We\u2019ve had clients send back pallets of parts that sat in a too-hot warehouse for a week, and yep, they were garbage. That\u2019s why nailing storage requirements isn\u2019t just a box to tick\u2014it\u2019s how you keep your supply chain from blowing up.<\/p>\n

Let\u2019s start with temperature, because that\u2019s the big one everyone hears about but no one gets right. I\u2019m talking 15\u00b0C to 25\u00b0C, consistently. Wait, consistency is key\u2014fluctuations are the enemy, not just a number on a thermometer. If you\u2019re storing parts in a space that swings from 10\u00b0C at night to 30\u00b0C during the day, condensation is gonna be your problem. Even if you don\u2019t see it, tiny water molecules can sneak past the hermetic seal (even the best ones aren\u2019t 100% impermeable over months) and corrode the internal contacts or mess up the epitaxial layers. We once tested a batch of TO-cans left in a semi-truck trailer in Arizona in July\u2014swings from 18\u00b0C to 32\u00b0C every day, and 12% of them had pinhole corrosion on the cathode after 3 months. Total waste. Also, don\u2019t stick them near space heaters, server racks, or windows that get direct sun. Direct sunlight isn\u2019t just about heat\u2014it\u2019s UV radiation, which can degrade the metal seals and even the VCSEL\u2019s active layer over time. We\u2019ve had a client stack parts on a sunlit loading dock for an hour during loading, and half of those parts had a 10nm wavelength shift when we tested them. Wild, right?<\/p>\n

Next up\u2014humidity. This is where most people go wrong, because they think \u201cdry is better\u201d but no, it\u2019s 40% to 60% relative humidity (RH). Wait, hold on, why not ultra-dry? If you go below 30% RH, you get static electricity. VCSELs have super sensitive semiconductor junctions, and even a tiny electrostatic discharge (ESD) that you can\u2019t feel (like a static shock from a doorknob\u2014wait, that\u2019s ~3,000V, and VCSELs can get fried at just 100V!) can kill them instantly. I\u2019ve seen a batch of 500 TO-cans that were stored in a nitrogen-purged cabinet with 5% RH\u2014when a tech pulled them out without a wrist strap, 80% of them had dead junctions. Total disaster. On the flip side, above 60% RH means way too much moisture in the air. That leads to that condensation I mentioned earlier, but also mold? No, not mold\u2014wait, the packaging. Most TO-cans come in anti-static packaging, and if that packaging gets too humid, it can off-gas chemicals that stick to the VCSEL\u2019s lens or the internal mirrors, killing output power. We tested RH at 70% for a month, and parts had a 20% drop in power just from that. So 40-60% RH is the sweet spot. Got it.<\/p>\n

Now, let\u2019s talk about packaging. This isn\u2019t just putting them in a box\u2014there\u2019s a right way and a very wrong way. When we ship TO-cans to our clients, we seal them in anti-static, moisture-barrier bags (the kind that have a metalized inner layer, not just the thin plastic ones you get at the dollar store). Why? Because those bags slow down moisture and static. You also need to put a humidity indicator card (HIC) inside\u2014one that changes color if the humidity inside the bag goes above 60%\u2014so you can check before you even open it. If the HIC is blue, you\u2019re good; if it\u2019s pink, toss that bag. We\u2019ve had a client ignore the HIC once, opened a bag that was pink, and got 20% of parts with corrosion. Don\u2019t do that. Also, don\u2019t stack heavy boxes on top of the TO-cans. Even though TO-cans are tiny, they have fragile internal structures\u2014pressure can warp the housing or crack the lens, which kills alignment. We once had a client stack 5 boxes on a pallet of TO-cans, and when they unstacked them, 15% of the parts had misaligned lenses. Not a single one worked.<\/p>\n

Then there\u2019s location. Where you store the TO-cans matters more than you think. Don\u2019t put them in a warehouse near loading docks, where forklifts drive by kicking up dust, or near chemical storage areas (even if they\u2019re sealed, fumes can seep through packaging). Dust is a big one\u2014tiny dust particles can get on the lens when you open the bag, but even stored in the cabinet, if the cabinet isn\u2019t sealed, dust can accumulate over time and scratch the lens when you handle the parts. We had a client store parts in an open shelf in their factory, and after 2 months, when they opened the bags, 30% had lens scratches from dust. Useless. Also, keep them away from vibration\u2014like next to a generator or a conveyor belt. Vibration can loosen the internal components of the TO-can, which messes up alignment and performance. We tested parts stored next to a conveyor belt for 2 weeks, and the wavelength drift was 5nm, which is way outside the specs for most applications. That\u2019s unacceptably bad.<\/p>\n

Wait, what about shelf life? Let\u2019s be real\u2014you can\u2019t store them forever, but how long is too long? Our internal testing shows that if you follow the above storage conditions, TO-cans can be stored for up to 2 years without any performance drop. But after that, you should do a pre-test before using them\u2014check power, wavelength, and threshold current. We had a batch that was stored for 2.5 years, and when we tested them, 10% had a higher threshold current, meaning they needed more power to turn on. That\u2019s fixable, but not ideal. Also, label your storage boxes with the date you received them, so you rotate stock properly\u2014first in, first out, always. Don\u2019t leave the oldest parts sitting at the back of the shelf.<\/p>\n

Oh, and one last thing\u2014handling during storage and when you take them out. Even if you store them perfectly, if you pull them out with bare hands, you can leave oil from your skin on the housing, which over time can seep into the can and mess up the seals. You need to use ESD-safe gloves, like nitrile gloves, and use tweezers that are anti-static. Don\u2019t touch the lens or the internal parts, just the metal housing. We train all our warehouse staff on this, and we always tell our clients too\u2014we\u2019ve seen so many parts ruined by just a finger smudge on the lens. It\u2019s such a simple mistake, but it adds up.<\/p>\n

Look, I know this sounds like a lot of rules, but as someone who\u2019s been supplying VCSEL TO-cans for 8 years, I can tell you this: the parts that follow these storage rules end up working way better for our clients. The ones that cut corners? They come back as RMA, waste both our time and theirs, and no one wins. At the end of the day, VCSELs are precision devices\u2014they\u2019re made for things like 5G, LiDAR, data centers, and even medical devices, where performance can\u2019t be compromised. So if you\u2019re storing these parts, don\u2019t just throw them in a closet and forget about them. Get the right cabinet, monitor temperature and humidity, use the right packaging, and handle them with care.<\/p>\n

<\/p>\n

If you\u2019re a procurement manager, engineer, or anyone working with VCSEL TO-cans and you need reliable parts, or you have questions about your current storage setup\u2014hit us up to chat. We\u2019ve got years of real-world experience, not just lab specs, and we\u2019re here to help you avoid costly mistakes.<\/p>\n

TO Optical Communication<\/a> References:<\/p>\n

    \n
  1. "VCSEL Component Storage and Handling Guidelines", Photonics Manufacturing Association, 2021<\/li>\n
  2. "Environmental Effects on Semiconductor Laser Reliability", Journal of Lightwave Technology, Vol. 38, No. 12, 2020<\/li>\n
  3. "ESD and Humidity Controls for Optical Components", Electronic Components and Technology Conference, 2019<\/li>\n<\/ol>\n
    \n

    Hangzhou Brandnew Technology Co., Ltd.<\/a>
    Hangzhou Brandnew Technology Co., Ltd. is one of the leading vcsel to-can manufacturers and suppliers in China, has a professional factory which manufacturers high quality vcsel to-can and sells at competitive price. Welcome to wholesale our products made in China.
    Address: 17F,Building 2, Aoqiang Mansion, No. 6 Xiyuan 5th Rd,310030 Hangzhou,China
    E-mail: admin@brandnew-china.com
    WebSite:     https:\/\/www.brandnewdiode.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, fellow photonics nerds and component buyers! Let\u2019s cut to the chase\u2014if you\u2019re working with … What are the environmental requirements for VCSEL TO – can storage?<\/span>Read more<\/a><\/p>\n","protected":false},"author":136,"featured_media":3565,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3528],"class_list":["post-3565","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-vcsel-to-can-476e-76aacd"],"_links":{"self":[{"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/posts\/3565","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/users\/136"}],"replies":[{"embeddable":true,"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/comments?post=3565"}],"version-history":[{"count":0,"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/posts\/3565\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/posts\/3565"}],"wp:attachment":[{"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/media?parent=3565"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/categories?post=3565"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.monsterclimbs.com\/blog\/wp-json\/wp\/v2\/tags?post=3565"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}